PPP Routed
51
WAN Access Routers Getting Started Guide
6 • WAN Services
Figure 34. PPP link status
Central site configuration
If the router at the ISP or Central site is another WAN Access Routers, follow the instructions below. If not,
consult your third party router user manual for configuration.
See the web pages for the desktop above. Some configurable parameters are different although the process is
the same.
Configure the IP address of the Ethernet port (interface ip1) to be 192.168.172.3/24. The PC, connected to
the Ethernet LAN directly, must be on the same subnet in order to access the configuration web pages. In this
example, the PC’s IP address is 192.168.172.229/24. Notice that this subnet differs from the subnets of the
WAN service link and also the Ethernet port of the remote Black Box (which we just configured).
1. Bring up the web-page management system on your browser by entering the IP address of the Black Box,
192.168.172.3.
2. On the Menu, go to Service Configuration, then to WAN. Delete the default WAN services already defined.
3. Click on Create a new service in the main window, select “PPP routed” and click on the
Continue
button.
In the Description field, enter the description. In this example, it is called PPP Routed.
– Description: PPP Routed
– Interface: 1
– WAN IP address and Mask: 192.168.164.3 255.255.255.255
– LLC Header Mode: off
– HDLC Header Mode: ON
– No authentication
Summary of Contents for LR120A
Page 1: ...LR120A LR121A LR122A LR125A WAN Access Routers Getting Started Guide...
Page 24: ...19 Chapter 2 Product Overview Chapter contents Introduction 20 Applications overview 21...
Page 115: ...110 Appendix B Cable recommendations Chapter contents Ethernet Cable 111 Adapter 111...
Page 128: ......
