WAN Access High Speed Routers overview
15
WAN Access Routers Getting Started Guide
1 • General Information
•
SNMPv1 (RFC 1157) MIB II (RFC 1213)
•
Logging via SYSLOG, and VT-100 console.
•
Console port set at 9600 bps, 8 data bits, no parity, 1 stop bit, and no flow control.
Security
•
Packet filtering firewall for controlled access to and from LAN/WAN. Support for 255 rules in 32 filter sets.
16 individual connection profiles.
•
DoS Detection/protection. Intrusion detection, Logging of session, blocking and intrusion events and Real-
Time alerts. Logging or SMTP on event.
•
Password protected system management with a username/password for console and virtual terminal. Sepa-
rate user selectable passwords for SNMP RO/RW strings.
•
Access list determining up to 5 hosts/networks which are allowed to access management system
SNMP/HTTP/TELNET.
•
Logging or SMTP on events: POST, POST errors, PPP/DHCP, IP.
Front panel status LEDs and console port
The WAN Access Routers have all status LEDs and console port on the front panel of the unit, and all other
electrical connections are located on the rear panel.
Figure 1. WAN Access Router (LR120A shown)
Summary of Contents for LR120A
Page 1: ...LR120A LR121A LR122A LR125A WAN Access Routers Getting Started Guide...
Page 24: ...19 Chapter 2 Product Overview Chapter contents Introduction 20 Applications overview 21...
Page 115: ...110 Appendix B Cable recommendations Chapter contents Ethernet Cable 111 Adapter 111...
Page 128: ......
