724-746-5500 | blackbox.com
Page 57
Chapter 5: Configuration
• Sender IP Mask: When “Network” is selected for the sender IP filter, you can enter a specific sender IP mask in dotted decimal
notation.
• Target IP Filter: Specify the target IP filter for this specific ACE.
Any: No target IP filter is specified. (Target IP filter is "don't-care".)
Host: Target IP filter is set to Host. Specify the target IP address in the Target IP Address field that appears.Network: Target IP
filter is set to Network. Specify the target IP address and target IP mask in the Target IP Address and Target IP Mask fields that
appear.
• Target IP Address: When “Host” or “Network” is selected for the target IP filter, you can enter a specific target IP address in
dotted decimal notation.
• Target IP Mask: When “Network” is selected for the target IP filter, you can enter a specific target IP mask in dotted decimal
notation.
• ARP SMAC Match: Specify whether frames can hit the action according to their sender hardware address field (SHA) settings.
0: ARP frames where SHA is not equal to the SMAC address.
1: ARP frames where SHA is equal to the SMAC address.
Any: Any value is allowed (“don't-care.”)
• RARP DMAC Match: Specify whether frames can hit the action according to their target hardware address field (THA) settings.
0: RARP frames where THA is not equal to the DMAC address.
1: RARP frames where THA is equal to the DMAC address.
Any: Any value is allowed (“don't-care”).
• IP/Ethernet Length: Specify whether frames can hit the action according to their ARP/RARP hardware address length (HLN) and
protocol address length (PLN) settings.
0: ARP/RARP frames where the HLN is not equal to Ethernet (0x06) or the (PLN) is not equal to IPv4 (0x04).
1: ARP/RARP frames where the HLN is equal to Ethernet (0x06) and the (PLN) is equal to IPv4 (0x04).
Any: Any value is allowed ("don't-care").
• IP: Specify whether frames can hit the action according to their ARP/RARP hardware address space (HRD) settings.
0: ARP/RARP frames where the HLD is not equal to Ethernet (1).
1: ARP/RARP frames where the HLD is equal to Ethernet (1).
Any: Any value is allowed (“don't-care”).
• Ethernet: Specify whether frames can hit the action according to their ARP/RARP protocol address space (PRO) settings.
0: ARP/RARP frames where the PRO is not equal to IP (0x800).
1: ARP/RARP frames where the PRO is equal to IP (0x800).
Any: Any value is allowed (“don't-care”).
IP Parameters
The IP parameters can be configured when Frame Type "IPv4" is selected.
• IP Protocol Filter: Specify the IP protocol filter for this ACE.
Any: No IP protocol filter is specified (“don't-care”).
Specific: If you want to filter a specific IP protocol filter with this ACE, choose this value. A field for entering an IP protocol filter
appears.
