724-746-5500 | blackbox.com
Page 27
Chapter 4: System
Parameter description:
• User Name: The name identifying the user. This is also a link to Add/Edit User.
• Password: Type the password. The allowed string length is 0 to 255, and the allowed content is the ASCII characters from 32 to
126.
• Password (again): Type the password again. You must type the same password again in the field.
• Privilege Level: The privilege level of the user. The allowed range is 1 to 15. If the privilege level value is 15, it can access all
groups; i.e., it is granted the full control of the device. But other values need to refer to each group privilege level. A user's privi-
lege should be same or greater than the group privilege level to have the access to that group. By default, most groups privilege
level 5 has read-only access and privilege level 10 has read-write access. And the system maintenance (software upload, factory
defaults, and etc.) need user privilege level 15. Generally, the privilege level 15 can be used for an administrator account, privi-
lege level 10 for a standard user account and privilege level 5 for a guest account.
4.3.2 Privilege Level
This page provides an overview of the privilege levels. The switch provides user-set Account, Aggregation, Diagnostics, EEE, GARP,
GVRP, IP, IPMC Snooping, LACP, LLDP, LLDP, MED, MAC Table, MRP, MVR, MVRP, Maintenance, Mirroring, POE, Ports, Private
VLANs QoS. SMTP, SNMP Security, Spanning Tree, System, Trap, Event, VCL, VLANs, Voice, and VLAN Privilege Levels from 1 to
15.
Web Interface
To configure Privilege Level in the Web interface:
1. Click SYSTEM, Account, Privilege Level.
2. Specify the Privilege parameter.
3. Click Apply.
