103
Adding/Editing Users
Serial Port Access Tab
Overview
The
Serial Port Access
tab controls the user’s read/write access on any given Terminal Server serial
port. This pertains to users that are connecting from the network to a serial over a Console
Management type session.
This can be useful when you have multiple users connecting to the same serial device and you wish
to control the viewing and/or the write to and from the device. See the
Multisessions
and
User
Authentication
parameters in the
Console Management Profile
on page 63
for the serial port
settings.
Field Descriptions
Configure the following parameters:
Serial Port Access
Specifies the user access rights to each Terminal Server serial port device.
There can be multiple users connected to a particular serial device and these
settings determine the rights of this user for any of the listed serial ports.
Data Options:
z
Read/Write
—The user has read and write access to the serial port.
z
Read In
—The User will see data going to the serial port, from all
network-connected users that have write privileges to this serial port.
z
Read Out
—The user will have access to all data originating from the
serial device.
Users can read data going in both directions by selecting both the
Read In
and
Read Out
options.
Default:
Read/Write
