Serial Port Profiles
86
Terminal Server User Guide, Version 3.3
Advanced Tab Field Descriptions
Configure the following parameters:
Numeric Codes
When enabled, the connection status is sent to the connected device using the
following numeric codes:
z
0 OK
z
1 CONNECTED
z
2 RING
z
3 NO CARRIER
z
4 ERROR
z
6 ITERFACE DOWN
z
7 CONNECTION REFUSED
z
8 NO LISTNER
Default:
Enabled
Echo characters in
command mode
When enabled, echoes back characters that are typed in (equivalent to
ATE0/ATE1 commands).
Default:
Disabled
DTR Signal Always
On
Specify this option to make the DTR signal always act as a DTR signal.
Default:
Enabled
DTR Signal Acts as
DCD
Specify this option to make the DTR signal always act as a DCD signal.
Default:
Disabled
DTR Signal Acts as
RI
Specify this option to make the DTR signal always act as a RI signal.
Default:
Disabled
RTS Signal Always
On
Specify this option to make the RTS signal always act as a RTS signal.
Default:
Enabled
