71
Serial Port Profiles
General Tab Field Descriptions
Configure the following parameters:
Listen for
Connection
When enabled, the Terminal Server listens for a connection to be established
by the Workstation/Server on the network.
Default:
Enabled
TCP Port
The TCP port that the Terminal Server will use to listen for incoming
connections.
Default:
10000 plus the serial port number, so serial port 2 would have a
default of 10002
Allow Multiple
Hosts to Connect
When this option is enabled, multiple hosts can connect to the serial device that
is connected to this serial port.
Default:
Disabled
Connect To
When enabled, the Terminal Server initiates communication to the
Workstation/Server.
Default:
Disabled
Host Name
The name (resolvable via DNS) or IP address of the configured host the
Terminal Server will connect to.
TCP Port
The TCP Port that the Terminal Server will use to communicate to the client.
Default:
0
Connect to
Multiple Hosts
When enabled, allows a serial device connected to this serial port to
communicate to multiple hosts.
Default:
Disabled
Define Additional
Hosts Button
Click this button to define the hosts that this serial port will connect to. This
button is also used to define the Primary/Backup host functionality.
