85
Serial Port Profiles
General Tab Field Descriptions
Configure the following parameters:
Connect
Automatically At
Startup
When enabled, automatically establishes the virtual modem connection when
the serial port becomes active.
Default:
Enabled
Host Name
The preconfigured target host name.
TCP Port
The port number the target host is listening on for messages.
Default:
0 (zero)
Connect Manually
Via AT Command
When enabled, the virtual modem requires an AT command before it
establishes a connection. Specify this option when your modem application
sends a phone number or other AT command to a modem. The serial device
can supply an IP address directly or it can provide a phone number that will be
translated into an IP address by the Terminal Server using the mapping table.
Default:
Disabled
Phone Number to
Host Mapping
Button
When your modem application provides a phone number in an AT command
string, you can map that phone number to the destination host.
See
Phone Number to Host Mapping
on page 87
for information about the
window that appears when you click this button.
Send Connection
Status As
When enabled, the connection success/failure indication strings are sent to the
connected device, otherwise these indications are suppressed. This option also
determines the format of the connection status results that are generated by the
virtual modem.
Default:
Enabled
Verbose String
When enabled, the connection status is sent by text strings to the connected
device.
Default:
Disabled
Success String
String that is sent to the serial device when a connection succeeds.
Default:
CONNECT <
speed
>, for example,
CONNECT 9600
Failure String
String that is sent to the serial device when a connection fails.
Default:
NO CARRIER
