Black Box ICOMP, User Manual

Page: 16 / 92

Copyright (c) 2009 - 2012 Black Box Corporation
724-746-5500 | blackbox.com 16
iCompel Data Engine - User Guide (V3.1.2)
2.3.2 Microsoft Exchange Server Connector
The Exchange
®
Connector is used to retrieve and process calendar and email items stored in Microsoft
®
Exchange
®
Server.
The iCompel Data Engine (iDE) is able to process items stored in the following versions of Exchange
®
Server:
Exchange
®
Server 2003
Exchange
®
Server 2007
Exchange
®
Server 2010
To use this Connector, please select the Microsoft
®
Exchange
®
option from the Data Source page, and visit the
Exchange page to specify the configuration properties.
Note: By default, the Enterprise Web Services query method is selected, which is compatible with Exchange
®
Server 2007 Service Pack 1 and above. If earlier versions of Exchange
®
Server are in use, please use the WebDAV
query method instead. The query method in use is summarized at the bottom of the the Exchange page, and can
be altered on the Advanced Microsoft Exchange Server Settings page.
Note: This Connector may require an additional license to operate.
2.3.2.1 Basic Settings
This page is used to configure the Microsoft Exchange
®
Connector.
The Exchange
®
server property specifies the hostname (or IP address) for the Exchange
®
server you wish to
connect to. Please ensure the protocol entry is set to either HTTP or HTTPS as needed.
User Name and Password properties specify the credentials used to connect to the above Exchange Server, and in
general will refer to an ActiveDirectory
®
user. This user must also have an Exchange
®
Mailbox account, and the
Exchange
®
user must have been granted permission to view all resources listed in the Mailboxes section.