TELCOLINK DT - AccessDSL NTU
User
Manual
Version: 2.5
Page 25 of 66
7.2.2 Password protection and access rights
There are two access levels to the system: Administrator (username: ADMIN) end User (username:
USER).
All the commands are available for Administrator while Configuration commands are not accessible
by User.
If administrator password does not set then entering to main menu happens without password
request. In this case Administrator access rights are granted.
If Administrator password is set then system prompts for Username:
username :
and then
password :
Username field is fixed (only ADMIN and USER names are permitted).
7.2.3 Command set tree for Normal and Dual modes (* - Administrator access only)
Main Menu
Performance
Fault and Maintenance
Configuration
Security
G826
SQ
CONFIG
PSW ADMIN*
G826 C
STARTUP*
HW
PSW USER*
G826 E1
STATUS
TSSHOW
G826 E1 C
ALARM
G704*
RESETG826*
ALARM T
CRC4*
HIST*
TLM
EBIT*
RESETHIST*
RESETTLM*
AISGEN*
DATE*
TLMCONF*
AISDET*
TIME*
TLMSET*
PCM*
LOOP1*
IDLECAS*
LOOP2*
IDLEPAT*
STARTAL*
SIGSLOT*
RESTART*
SERVICE*
SPECTRUM*
TYPE*
ACO*
BITRATE*
RESET*
CLOCKDIR*
AUTOLOOP*
SLOTUSAGE*
MODE*
MASTER*
PLL*
RS232SLOT*
RS232BITS*
RS232RATE*
RS232ERATE*
AUTORST*
BASERATE*
ADAPT*
SETADDR*
SCALE*
DEFAULT*
ANNEX*
ID*
SOM*
