Black Box DESKTOP TELCO, User Manual, Page: 42 / 66

TELCOLINK DT - AccessDSL NTU
User Manual
Version: 2.5 Page 42 of 66
7.2.10.14 SERVICE Command
SYNTAX: SERVICE [E/N/M] or SRV [E/N/M]
Select one of four available services:
E
E1 only
N Nx64 only
M Multiservice Nx64 & fE1 (fractional E1)
7.2.10.15 TYPE Command
SYNTAX: TYPE [n] or TP [n]
This command sets the Nx64 interface type.
Parameters:
0
V.35
1 V.11 (V.36/X.21) without termination
2 V.11 (V.36/X.21) with termination
3 V.28 synchronous
4 RS232 asynchronous
7.2.10.16 BITRATE Command
SYNTAX: BITRATE [n] or BTR [n]
This command sets the Nx64 payload bit rate to [1..32] x 64 kbit/s for V.35 and V.11 or [1..2] x 64
kbit/s for V.28.
Parameters:
n:
1-31 depending on the Nx64 interface type
7.2.10.17 CLOCKDIR Command
SYNTAX: CLOCKDIR [CO/CONTRA] or CD [CO/CONTRA]
This command sets the Nx64 port clock direction to co- or contradirectional.
Parameters:
CO
Codirectional uses input line 113 for input data (103) sampling
CONTRA Contradirectional uses output line 114 for input data (103) sampling