TELCOLINK DT - AccessDSL NTU
User
Manual
Version: 2.5
Page 40 of 66
Set automatic E-Bit insertion on / off
7.2.10.7 AISGEN Command
SYNTAX: AISGEN [ON/OFF] or AG [ON/OFF]
Set AIS generation on / off
7.2.10.8 AISDET Command
SYNTAX: AISDET [ON/OFF] or AD [ON/OFF]
Set AIS detection on / off
7.2.10.9 PCM Command
SYNTAX: PCM [30/31]
This command enables/disables signaling timeslot processing:
Parameters:
[31]: Set signaling timeslot processing off.
[30]: Set signaling timeslot processing on. Signaling slot is transmitted transparently.
7.2.10.10
PAYLOAD Command
SYNTAX: PAYLOAD [a] [b] or PL [a] [b]
This command sets the numbers of channelTS to be transmitted to xDSL interfaces A and B.
7.2.10.11
IDLECAS Command
SYNTAX: IDLECAS [hex] or IC [hex]
This command sets the idle pattern (1..F) for the signaling TS.
7.2.10.12
IDLEPAT Command
SYNTAX: IDLEPAT [hex] or IDP [hex]
This command sets the idle pattern (0..FF) for unused data slot(s).
7.2.10.13
SIGSLOTS Command
SYNTAX: SIGSLOTS [AUTO/a,e] or SS [AUTO/a,e]]
This command sets the signaling slot number of the DSL A and E1 interface.
Valid only for the PCM 30 mode.
Parameters:
