TELCOLINK DT - AccessDSL NTU
User
Manual
Version: 2.5
Page 29 of 66
Available time : 00000000 00000000
Unavailable time : 00000135 00000135
----------------------------------------------------------------------
CP_PM>
If CRC4 detection mode is off, the following parameters are displayed:
CP_PM>G826 E1
----------------------------------------------------------------------
G.826 Error Performance : FAS
----------------------------------------------------------------------
Errored blocks : 00000000
Errored seconds : 00000000
Severely errored seconds : 00000000
Background block errors : 00000000
Available time : 00000000
Unavailable time : 00000051
----------------------------------------------------------------------
CP_PM>
Option:
C
Updates the G.826 E1 parameters continuously
Definitions:
1. CRC4: Cyclic redundancy check indicating errored sub-multiframes received on the local 2Mbit/s
E1 side.
2. E-bit: CRC-4 indication bit indicating received errored sub-multiframes on the 2Mbit/s E1 remote
side.
3. FAS: Errored Frame Alignment Signal received on the 2Mbit/s E1 side. The criteria for severely
errored seconds (SES) are 28 FAS-Errors per second. (In accordance to G.821)
7.2.8.3 RESETG826 Command
SYNTAX: RESETG826 or RG
The RESETG826 command sets the G.826 error performance parameters back to zero.
CO_PM>RESETG826
G.826 error performance parameter reset
CO_PM>
7.2.8.4 HIST Command
SYNTAX: HIST [i] [t] or HI [i] [t]
This command displays the history data.
Parameters:
i:
D
for DSL interface
E
for E1 interface
N
for Nx64 interface
ETH
for Ethernet interface
t:
A
for
7
for the last 7 days
24
for the last 24 hours
