Page 27
877-877-2269 | blackbox.com
Chapter 4: Operation
Figure 4-3. Connect to LAN
1. Connect the TCP/IP port of the Switcher to the Ethernet port of PC with twisted pair.
2. Set the PC’s network segment to the same as the Switcher. Remember the PC’s origi-
nal network segment.
3. Set the Switcher’s network segment to the same as the router.
4. Set the PC’s network segment to the original one.
5. Connect the Switcher and PC(s) to the router. In the same LAN, each PC can control
the Switcher asynchronously.
Then it can control the device via TCP/IP communication software.
