Page 26
877-877-2269 | blackbox.com
Chapter 4: Operation
4.3 TCP/IP Control
4.3.1 Control Modes
TCP/IP default settings: IP is 192.168.0.178, Gateway is 192.168.0.1, and Serial Port is
8080. IP can be changed as you need, Serial Port cannot be changed.
• Controlled by single PC: Connect a computer to the TCP/IP port of the Switcher, and
set its network segment to the same as the default IP of the Switcher (192.168.0.178).
Figure 4-2. Modify the IP of PC.
• Controlled by PC(s) in LAN
The Switcher can be connected with a router to make up a LAN with the PC(s); this
makes it able to be controlled in a LAN. The Switcher’s network segment is the same as
the router.
