Page 23
877-877-2269 | blackbox.com
Chapter 4: Operation
Table 4-2 (continued). RS-232 communication commands.
Operation Commands (continued)
Command
Function
Feedback Example
EDIDPCM[x].
Set the audio of input x to
PCM in EDID database.
EDIDPCM1
EDIDH[x]B[y].
Copy the EDID data from out-
put x to input y.
If the EDID data is available
and the audio part supports
not only PCM format, then
force-set it to only support
PCM. If the EDID data is not
available, it will set to initial
EDID.
EDIDH1B1
PWON.
Work normally.
PWON
STANDBY.
Enter standby mode.
(Return to normal mode via
front panel buttons/ any other
command/ IR remote)
STANDBY
/%[x]:[y].
Manage HDCP status of out-
puts
“x” stands for output port,
can be 1–4 or ALL. When
x=ALL, it means manage
HDCP status of all outputs.
“y” stands for HDCP status,
can be 1 (with HDCP) or 0 (not
with HDCP).
/%ALL:0.
%0801.
Enable auto HDCP manage-
ment (HDCP Active)
%0801.
