Page 39
877-877-2269 | blackbox.com
Chapter 4: Operation
4.3.4 TCP/IP Configuration
IP address, subnet mask, and Gateway of Switcher can be modified via GUI from the
above description, but beyond that users can configure the IP port, including IP reset,
password reset, and IP module firmware update on the WebServer.
Type the designed website (Default: 192.168.0.178:100, changeable) in your browser.
Enterthe correct username and password to log in the WebServer:
Username: admin; Password: admin
Here is the main configuration interface of the WebServer:
Figure 4-16. TCP/IP Configuration.
4.3.5 GUI Update
The GUI for Switcher supports online updating at http://192.168.0.178:100. Type the
username and password (the same as the GUI log-in settings, modified password will
be available only after rebooting) to log in the configuration interface. After that, click
Administration at the source menu to Upload Program as shown below:
Figure 4-17. GUI Update.
Select the desired update file and press Apply and the upgrade will begin.
