Page 15
877-877-2269 | blackbox.com
Chapter 2: Overview
7
8 9 10
1 2 3 4 5 6
Figure 2-4. Back panel (AVS808-H).
Table 2-4. Back panel components (AVS808-H).
Number in
Figure 2-4
Component
Description
1
RJ-45 port
RJ-45 port:TCP/IP port for unit control
2
IR IN
Input port for IR control signal,
connects to an IR receiver.
3
3-pin pluggable
terminal block
This RS-232 serial port connects to a control
device
4
4-position DIP
Switch
Used to set EDID data: “1” stands for “ON,”
“0” stands for “OFF” See Section 4.4 for
more details.
5
Micro USB port
Used to upgrade firmware.
6
(8) 3.5-mm RCA
(SPDIF audio)
output ports
Used for unembedded HDMI audio.
7
(8) HDMI input
ports
Connect to HDMI sources.
8
(8) HDMI output
ports
Connect to HDMI displays.
9
Power connector
Connects to 24-VDC 2.5-A power adapter.
10
Ground
Connects to ground.