Page 21
877-877-2269 | blackbox.com
Chapter 4: Operation
Table 4-2 (continued). RS-232 communication commands.
Operation Commands
Command
Function
Feedback Example
Undo.
Cancel the previous operation.
Undo Ok!
Demo.]
Switch to the “demo” mode,
convert input and output in turn
like 1B1, 1B2, …4B3, 4B4, 1B1…
and so on .The switching interval is
2 seconds.
Switch to normal mode by press-
ing any front panel button or
sending any other command.
Demo Mode
[x]All.
Transfer signal from input x to all
outputs.
1 To All.
All#.
Transfer all inputs to corresponding
outputs, like 1->1, 2->2…
All Through.
[x]#.
Transfer signal from input x to out-
put x.
1 Through.
All@.
Switch on all outputs.
All Open.
[x]@.
Switch on output x.
1 Open.
All$.
Switch off all outputs, but except
coaxial outputs for digital audio.
All Closed.
[x]$.
Switch off output x.
1 Closed.
[x]B[y1],[y2],[y3].
Transfer AV signal from input x to
output y1, y2, y3
1B2
BlackscreenON[x].
Switch on input x.
BlackscreenON1.
BlackscreenOFF[x].
Switch off input x.
BlackscreenOFF1.
Save[y].
Save the present operation status
to preset command y, y=0–11.
Save To F1
Recall[y].
Recall preset command y, y=0–11.
Recall From F1
