OPERATING
MODES
67
Setup
In ‘Singlehead- KVM- Switch’ operating mode the following setups are possible:
Master/Slave function
The device is Master (default status: it is either the exclusive device in
the system, or if CATX DVI-D KVM Switches are cascaded, it is on
the highest level (directly after the console).
The device is Slave: if CATX DVI-D KVM Switches are cascaded, it
is on second level (directly after the Local Units).
Operating mode after Reset/Power ON
After a reset, the DEFAULT- Mode is selected:
The console (Remote Unit) is switched to input 1 (Local Unit at
CPU1).
After reset, the previous mode before reset or power OFF is selected.
Summary of Contents for ACS4001A-R
