OPERATING
MODES
57
Configuration ‘Crosspoint-Switch’
3 Inputs / 5 Outputs
The signals of 3 Local Units is switched on up to 5 outputs and transferred over CATx- cables
to 5 Remote Units. Optionally a further CATX DVI-D Switch can be inserted for a second
switching stage.
Configuration ‘Crosspoint-Switch’
4 Inputs / 4 Outputs
The signals of 4 Local Units is switched on up to 4 outputs and transferred over CATx- cables
to 4 Remote Units. Optionally a further CATX DVI-D Switch can be inserted for a second
switching stage.
L
1
L
2
L
3
R
2
R
4
R
5
R
3
R
1
Connect to the DRACO™-
Media Remote Units
Push button; for the
sequential selection of pre-
programmed configurations
Connect to 5V power
supply
Connect to the DRACO™-
Media Local Units
L
4
L
1
L
2
L
3
R
2
R
4
R
3
R
1
Push button; for the
sequential selection of pre-
programmed configurations
Connect to 5V power
supply
Connect to the DRACO™-
Media Local Units
Connect to the DRACO™-
Media Remote Units
Summary of Contents for ACS4001A-R
