DVI-D CATX SWITCH/SPLITTER
46
Reset of the internal DDC table to default-values
If you have loaded several DDC configurations without achieving a satisfactory result,
you can restore the original (default) DDC table. To do this:
•
Switch off the Local Unit.
•
Open the Local Unit as described above.
•
Remove the jumper on JP1 (jumpers JP1 and JP2 are open now – on dualhead devices
remove the JP1 jumper on BOTH PCB’s!).
•
Switch on the Local Unit.
•
After a successful reprogramming of the DDC-EPROM, the ‘Video-OK’ LED at the
Local Unit blinks rapidly for approx. 1 second.
•
Switch off the Local Unit.
•
Replug jumper JP1 (dualhead devices: replace the JP1 jumper on BOTH PCB’s!).
•
Close the Local Unit.
•
Switch on the Local Unit.
Summary of Contents for ACS4001A-R
