Black Box ACS4001A-R, User Manual

Page: 70 / 119

DVI-D CATX SWITCH/SPLITTER
70
Control commands
In Singlehead KVM- Switch operating mode, the following control commands are allowed:
•
STX, 0x40, 0x80, ETX Acknowledgement of the system info
•
STX, 0x45, ETX Reset on factory settings
•
STX, 0x54, ETX Reset the Crosspoint- Switch
•
STX, 0x4F, 0x81, < Loc-No>, ETX
S
witch (local-)input to (remote-)output, the
existing connection is disconnected at the
same time
where:
< Loc-No> 7Bit date 1 to 7
Examples:
STX, 0x54, ETX Reset the switch and set the connections as a function of
SW7 (see above)
STX, 0x40, 0x80, ETX Read the system info (version number) from the switch
STX, 0x4F, 0x81, 0x84, ETX Switch console (Remote Unit) to (Local Unit) CPU 4
STX, 0x4F, 0x81, 0x85, ETX Switch console (Remote Unit) to (Local Unit) CPU 5
(existing connection to CPU 4 is disconnected)
STX, 0x54, ETX Reset the switch and set the connections as a function of
SW7 (see above)