DVI-D CATX SWITCH/SPLITTER
56
Configuration ‘Crosspoint-Switch’
1 Input / 7 Outputs
The signal of a Local Unit is switched on up to 7 outputs and transmitted over CATx- cables
on up to 7 Remote Units. Optionally a further CATX DVI-D Switch can be inserted for a
second switching stage.
Configuration ‘Crosspoint-Switch’
2 Inputs / 6 Outputs
The signals of 2 Local Units is switched on up to 6 outputs and transferred over CATx- cables
to 6 Remote Units. Optionally, a further CATX DVI-D Switch can be inserted for a second
switching stage.
R
1
R
3
R
2
R
4
R
5
R
6
R
7
L
Connect to the DRACO™-
Media Remote Units
Push button; for the
sequential selection of pre-
programmed configurations
Connect to 5V power
supply
Connect to the
DRACO™-Media
Local Unit
R
5
R
3
R
4
R
2
R
1
R
6
L
1
L
2
Push button; for the
sequential selection of pre-
programmed configurations
Connect to 5V power
supply
Connect to the DRACO™-
Media Local Units
Connect to the DRACO™-
Media Remote Units
Summary of Contents for ACS4001A-R
