DVI-D CATX SWITCH/SPLITTER
22
3.3 System Setup
To install your CATX DVI-D Switch system:
1.
Switch off all devices.
2.
Connect your keyboard, monitor(s) and mouse to the Remote Unit (depending on device
type).
3.
Connect the CPU/signal source to the Local Unit using the supplied cable(s).
4.
Take the CATX DVI-D switch from the packing and also the sheet with the product
stickers.
5.
According to your application, peel the corresponding sticker from the sheet and stick it
on the top panel:
6.
Use the associated stickers to label the interface ports:
Summary of Contents for ACS4001A-R
