QUICK
SETUP
11
1. Quick Setup
This section briefly describes how to install your CATX DVI-D Switch system. Unless you
are an experienced user, we recommend that you follow the full procedures described in the
rest of this manual.
Installation of the system
1.
Mark the CATx DVI-D KVM SWITCH with the help of the provided
stickers according to your application
2.
Set the DIP-switch according to your application
3.
Connect CATx DVI-D KVM Switch to Local unit with CATx- cable(s).
4.
Connect CATx DVI-D KVM Switch to Remote unit with CATx- cable(s).
5.
Connect the devices to the power supplies.
6.
Power up the system.
Done
YES
NO
Link
LED
illuminated?
NO
YES
Check p.s.u.’s and connection to
power outlet
Power
LED
illuminated?
Check the CATx- cable, and
CATx- connectors
Summary of Contents for ACS4001A-R
