Chapter 2 : TECHNICAL DESCRIPTION Multi-Input Video Scaler
PAGE 6
Chapter 2 :
TECHNICAL DESCRIPTION
2-1.
FRONT PANEL
POWER:
LED indicating device is ON.
INPUT SELECTION:
•
A short push on this button allows selecting successively the following input:
COMPOSITE 1
COMPOSITE 2
S.VIDEO 1
S.VIDEO 2
RGB.S
COMPONENT
COMPUTER
•
A long push on this button (5 seconds) allows making the hard reset procedure. See
Chapter 9 : TROUBLESHOOTING.
FORMAT:
2 LED’s indicating the selected input aspect ratio.
4/3: 4/3 format.
16/9: Letterbox format.
4/3 + 16/9: Widescreen Anamorphic format.
DISPLAY:
Selection of the display device type.
•
LCD: Liquid Crystal Display device
•
CRT/DMD: display device using CRT (Cathode Ray Tube) or DMD (DLP)
technologies.
3/2 FILM:
Automatic correction of "movie to video transfer" (3/2 pull down for the NTSC
movies).
2-2.
REAR PANEL
POWER SUPPLY:
Low voltage power supply input (on 6-pin mini DIN connector).
REMOTE RS-232:
Standard Remote Control on DB9 connector.
VIDEO INPUTS
C.V 1:
COMPOSITE 1 Video Input (on BNC connector).
C.V 2:
COMPOSITE 2 Video Input (on BNC connector).
S.V 1:
S.VIDEO 1 (Y/C) input (on 4-pin mini DIN connector).
S.V 2:
S.VIDEO 2 (Y/C) input (on 4-pin mini DIN connector).
R-Y, Y, B-Y:
COMPONENT (Interlaced YUV) Video Inputs (on 3 BNC connectors).
R, G, B, SYNC:
RGB.S video input (on 4 BNC connectors).
COMPUTER INPUT: Computer (PC, MAC, and WORKSTATION) or external input on HD15 female
connector.
DISPLAY OUTPUT
DATA output (RGB HV) on HD 15 female connector.
