2
FEATURES
1
2
3
7
5
4
6
8
9
10
11
12
13
15 16
18
14
19
17
1. Built-in 120 Volt AC Charger (under protective
cover)
2. Rubber Grip Handle
3. Jump-Starter Power Switch
4. Air Hose and Sure Fit
®
Nozzle Connector
5. Storage Compartment Cover
6. Nozzle Adapter
7. Positive (+) Red Clamp
8. LED Area Light
9. Negative (–) Black Clamp
10. Dual 120 Volt AC Outlets (under protective
covers)
11. Compressor Power Button
12. Compressor Pressure Control Button (+)
13. LCD Screen
14. AC/USB Power Button
15. Battery Status Button
16. 12 Volt DC Accessory Outlet (under protective
cover)
17. Compressor Pressure Control Button (–)
18. LED Area Light Power Button
19. USB Charging Port (under protective cover)
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not approved by the party responsible for compliance could void user’s authority to operate the equipment.
Summary of Contents for PPRH5B
Page 13: ...12 ...
