BK Precision XLN10014, User Manual

Page: 85 / 207

78
Using Telnet
The power supply can be controlled via Telnet over the Ethernet interface.
Simply go into command prompt under MS-DOS and enter: Telnet
<DeviceIP> 5024 (<Device IP> is IP address of the unit; 5024 is the
Telnet port). A welcome message will be shown as below:
Input SCPI command to communicate with the system, such as below:
Using Sockets
All XLN series use port 5025 to provide the standard function for SCPI
socket. Users can use SCPI commands to control the supply through
their own program by using the standard SCPI socket.