BK Precision XLN10014 User Manual Download

Page: 193 / 207

Commands), the return string will be “

”. If otherwise, an error

message will occur. See the table below for the list of errors and their

descriptions.

Return String

Description

Time out

Wait response time has timed

out

Range error

Input value is out of range

Multi master

More than one master is in the

chain.

Calibration

Note: B&K Precision recommends a calibration interval of one year for

this power supply. The following calibration instructions may be used by

authorized technicians or calibration personnel only. If you are not

authorized, do not attempt to calibrate the instrument yourself, as it may

damage the instrument and void the warranty.

5.1

Required Equipment

- 5 1/2 DVM (HP34401A)

- Shunt for current calibration (100 A/ 10 m

Ω)

Summary of Contents for XLN10014
















































































































































































































Search results

Summary of Contents for XLN10014

Reviews:

Related manuals for XLN10014

Brands by name

Popular brands

BK Precision XLN10014, User Manual

Search results

Summary of Contents for XLN10014

Reviews:

Related manuals for XLN10014

Brands by name

Popular brands