BK Medical bkSpecto, Advanced User'S Manual

Page: 117 / 164

bkSpecto Advanced User Guide (16-01642-01) DICOM 117
Chapter 11
DICOM
DICOM on the System
DICOM is not installed as a default on the system. When it is installed, it is set up
specially to match your DICOM system and procedures.
NOTE:
Changing the DICOM setup can cause your system to not work properly. For
example, you may be unable to print to a DICOM printer. All changes to the DICOM
setup should be made by qualified service personnel only. Do not try to change the
DICOM setup yourself.
New Patient Information from a DICOM Worklist
The system may be set up so that you can retrieve a worklist of patients and then
select a patient from the worklist.
Depending on how your DICOM system is set up, the worklist may appear as soon
as you open the
Patient window. If the worklist is blank, you can retrieve the
information.
To retrieve a worklist:
1
Use the drop-down window in the upper right corner to select the dates you want
the list to include.
2
Tap Update .
The worklist appears in the window. If there are more patients than can fit in the
window, you can scroll down to see the rest of the list.
To select a patient from the worklist:
1
Double-tap the row that contains the patient.
Now that patient is shown in the fields next to the worklist.
2
If required, enter additional information in the fields in the window.
NOTE:
You cannot delete a document from the system that is in a queue to be sent to
a DICOM device.
Saving or Printing to a DICOM Network
Filenames of Documents Exported in DICOM Format
The filename of an exported document specifies the date and time the image was
captured.
For example, 2D_20181022_135426_FV12345.dcm would be the label on an 2D
image of patient FV12345 that was captured on October 22, 2018 at 1:54:26 P.M.
(13:54:26).