INSTALLATION, OPERATION AND MAINTENANCE MANUAL
BiSolid Comfort OM-BSCV00/08/2012/EN
22
6. BOILER OPERATION AND CONTROLS WITH WOOD
PELLETS
6.1. BOILER FIRING
Before firing the boiler from series BiSolid Comfort 03/04/05 when utilizing wood logs please
comply with the instructions in part 5.1, presented in the current manual for operation.
When operating boilers from series BiSolid Comfort 03/04/05 with wood pellets, the user has
to use the additional front door on which a pellet burner from series Bisolid GP can be
installed. The boilers from series BiSolid Comfort 03/04/05 are equipped with control panel, so
quickly and easily (for less than a minute) you can switch from wood logs to wood pellets and
contrariwise.
The burners from series BiSolid GP can burn wood pellets with diameter
∅
6-8 mm and
category of wood pellets according to EN 14961-2 - ENplus-A1. Switching the boiler operation
from wood logs to wood pellets must be performed manually, by switching on the installed
pellet burner from series BiSolid GP.
Warning
When operating with wood pellets the user must be familiar in details with the
BiSolid GP pellet burner manual for installation, operation and maintenance.
When the boiler is operating with pellet burner you have to first switch on the main switch
button, which powers the burner control panel.
Warning
It is strongly recommended that starting of the pellet burner is done by the key
“Start” located on the electrical control panel (Please read the operation,
installation and maintenance manual of the pellet burner).
When a hot water boiler from series BiSolid Comfort 03/04/05 operates with wood pellets, the
user must first remove the protection grate located in the front side of the boiler (Figure 8).
