INSTALLATION, OPERATION AND MAINTENANCE MANUAL
BiSolid Comfort OM-BSCV00/08/2012/EN
32
Figure 13. Minimum distances in the boiler room.
Danger
When the boiler operates do not touch any hot water pipe lines or flue pipes.
7.6. INSTALLATION PROCEDURE
Position the boiler over inflammable material surface.
Install the temperature safety valve. During its installation make sure that the arrow
direction shows the water flow direction.
After connecting the boiler to the heating system screw the boiler’s filling and draining
stop cocks at its back side.
Install the flue pipe with the boiler’s flue flap for extracting the flue gasses.
Place the flue pipeline end in the chimney connection orifice. The boiler flue diameter
is 150 mm.
Mount the thermo-regulating valve in the orifice at the front section top side.
We recommend installation of hot water stopping valves at the inlet and outlet pipes,
before draining the entire heating system, so they can clean before the filter.
Any stop fittings should be installed between the boiler and the expansion tank.
