22
NOTE
•
After the camera ID and Baud rate is set, the camera has to be rebooted by powering the camera OFF
and ON.
•
For Dual-Output operation, the camera ID and Baud rate on the BirdUI has to be set to the same ID as
the camera’s for IP control.
•
You may need to reboot the keyboard after you change the camera ID and Baud rate.
•
Once modified and saved, the camera ID and baud rate, please modify the corresponding parameters
on both the keyboard and BirdUI setting, otherwise the camera and keyboard and IP control will be
unable to communicate.
Flip
Select ON to flip the image if you need to lift the camera.
SDI Video
Select the SDI video output format from the following: 1080p 60, 59.94, 50, 29.97, 25; 1080i 60, 59.94, 50; 720p 60,
59.94, 50, 29.97, 25
Pan Direction
Normal/Invert: Supports normal and inverted directions on Pan movement.
Tilt Direction
Normal/Invert: Supports normal and inverted directions on Tilt movement.
Proportional PT
Turn ON to automatically adjust the Pan and Tilt speed with various zoom ratios. For example, the higher zoom
ratio you use, the slower the speed of P/T. Turn OFF to inactivate the feature to set the flat speed of Pan and Tilt.
Set North
Select ON to open this function. Turn the camera to north, and then save it by calling preset 1.
System Info
Displays Camera ID, Baud Rate and SDI Video format.
System Reset
To save the changes have been made and make the changes activated.
Exit
Push the joystick to the right to exit this level menu.
