18
Camera Menus
Adjusting and Setting with Menus
About On-Screen Menus
You can change various settings, such as shooting conditions and system setup of the camera, while observing teh
On Screen Display (OSD) menus on a connected computer screen. The OSD is viewable over NDI® or SDI.
NOTE:
You cannot perform pan/tilt operations while the menu is displayed.
1.
Using a Keyboard controller, run preset number 95 to display the On Screen Menu.
2.
Navigate the menus by using the joystick:
a.
To select the menu, push the joystick up or down.
b.
To enter the menu, push the joystick to the right.
c.
To confirm the desired value, push the joystick to the right.
Exposure Menu
Mode
Full Auto: The exposure is adjusted automatically using the value set for EX-COMP.
Manual: Allows manual adjustment of the GAIN, shutter speed (SPEED) and iris (IRIS).
Iris Pri
:
Iris Priority mode. This mode allows you to set a fixed IRIS and EX-COMP with exposure achieved by
automatic setting of SPEED and GAIN.
Shutter Pri
:
Shutter Priority mode. This mode allows you to set a fixed shutter SPEED and EX-COMP with exposure
achieved by automatic setting of IRIS and GAIN.
Bright
:
The bright control function adjusts both gain and iris using an internal algorithm, according to a brightness
level freely set by the user. Exposure is controlled by gain in dark, conditions and by iris when bright conditions. As
both gain and iris are fixed, this mode is used when exposing at a fixed camera sensitivity. When switching from
Full Auto or Shutter Priority Mode to Bright Mode, the current status will be retained for a short period of time.
Listed below are the various parameters you can adjust, depending on your chosen exposure mode.
