19
Gain
Select the gain.
Speed
Select the shutter speed.
Iris
Select the iris setting.
Level
Select the brightness level.
Backlight Mode
When the background of the subject is too bright, or when the subject is too dark due to shooting in the AE mode,
back light compensation will make the subject appear clearer. This is set to ON, OFF.
WIDE-D (Wide dynamic range mode)
ON, OFF. The camera distinguishes light and dark areas within the same scene, adjusts the brightness for dark
areas, and also controls the blown out highlights.
Defog
ON, OFF. If the shooting scene has fog, you can open the defog function to improve the penetration of the image.
Auto Slow Shutter
ON, OFF. When AUTO SLOW SHUTTER is set to on, it can auto adjust the electronic shutter speed.
Ex-Comp (Exposure Compensation)
When MODE is set to one of FULL AUTO, SHUTTER PRI or IRIS PRI, set this item to ON to enable exposure
compensation. When you set EX-COMP to ON, LEVEL appears and you can select the exposure compensation
level from the following: -10.5, -9, -7.5, -6, -4.5, -3, -1.5, 0, +1.5, +3, +4.5, +6, +7.5, +9, +10.5
If you set the level to 0, exposure compensation will be disabled. Level +10.5 is the brightest and –10.5 is the darkest
compensation value. When EX-COMP is set to OFF, exposure compensation does not function.
Exit
Push the joystick to the right to exit this level menu.
White Balance Menu
WB Mode (White balance mode)
Auto: This mode computes the white balance value output using color information from the entire frame with a
range of values from 2500K to 7500K. This mode is the default setting.
Indoor: Sets the color temperature to 3200K.
Outdoor: Sets the color temperature to 5800K.
OPW (One Push White Balance): The One Push White Balance mode is a fixed white balance mode that may be
automatically readjusted only at the request of the user (One Push Trigger), assuming that a white subject, in
correct lighting conditions can occupying more than 1/2 of the image. One Push White Balance data is lost when
the power is turned off. If the power is turned off, you'll need to reset One Push White Balance.
To select OPW:
1.
Place a white subject (For example: A piece of white paper) in the center of the frame.
2.
Press the HOME button of the infrared remote controller. The one-push white balance adjustment is activated.
