PC Tool
74
Markers Tab
When a frequency or distance for a marker is entered, the marker will be set to
the datapoint closest to that frequency or distance. The actual frequency of the
marker will replace the value entered and will also display on the screen below
the graph area.
For each marker:
1.
Specify or change the frequency.
2.
Specify the symbol type.
3.
Specify a delta with another marker.
4.
Turn a marker on or off.
Note:
After turning a marker on in the Options window, the
marker can be moved by clicking on the marker and dragging it to
a desired location.
Figure
61
Example, Markers Tab
Limits 1 Tab
Defines and turns on or off upper/lower limit lines.
Note:
The options displayed on this tab will change slightly
depending on the type of graph opened.
Note:
The upper limit fails any datapoints that are above the line.
Note:
The lower limit fails any datapoints that are below the line.
Note:
The limit line will be flat across the graph at the power level
specified.
1.
Click on the line
2.
Drag the line to move it up and down.
Note:
There is a drop down menu of predefined limits that is
available to be utilized.
Summary of Contents for SignalHawk SH-36S-PC
