Biral A 1002, Installation And Operating Instructions Manual, Page: 39 / 116

39 english
7.1 Control panel
and key (A1) for setting type of control.
or key (A1) for setting the delivery head
with illuminated symbols (A2) to indicate delivery head.
Illuminated symbols (A3) to indicate delivery head and type of control.
Illuminated symbol: Fault message (red), operating message (green)
See Section 7.5
Pump settings can be adjusted via:
– The pump control panel
– The R100 remote control unit
The following table shows the functions that can be selected
and activated with the two control units (
3 ).
Function Control panel R100
Proportional pressure control
3 3
Constant pressure control
3 3
Setting the delivery head
3 3
Operation at the MAX characteristic curve
3 3
Operation at the MIN characteristic curve
3 3
Operation at a constant characteristic curve –
3
Temperature control –
3
Fault message reset
3 3
Activation/deactivation
of the pump control keyboard
–
3
Assignment of a pump number –
3
Readout of various data –
3
ON/OFF
3 3
«–» = Function not available via this control unit.
Danger of burns!
At high media temperatures the pump
can become so hot that only the control keys
can be touched.
7. Settings