background image

18

• To stop dispensing within 10 seconds, press the       button again.

2

Press the      button again to dispense water

1

Press the      button to unlock

• When the DISPENSE light is off, water cannot be 

   dispensed.

The DISPENSE green light blinks, the 

function is unlocked and water can be 

dispensed now. 

Activate dispensing with a gentle touch 

on the      button again within 3 sec after 

Unlocking. The “DISPENSE” green light 

remains "on" during water dispensing.

3 seconds

Dispensing Hydrogen Water

Blinks

Steady ON

*Right after dispensing, the DISPENSE light turns off and the Dispense Lock is activated.

Automatic Dispense Stop

Press once the       button provides a 10-second dispensing and it will stop automatically. 

[Approx. 250ml (±10%) ] 

• If no water is dispensed, the Dispense Lock is activated after 3 seconds. 

*Do not tilt or shake the product after dispensing. Water may drip from the Spout, causing 

scalds if the water is hot.

Dispense Lock

An automatic safety function to prevent water from dispensing if the       button is accidentally 

pressed.

Summary of Contents for EOS7150-H

































Reviews: