8
CLEANING & MAINTENANCE
Always unplug the Power Cord,
Remove the Filter, detach the Drip Grip
and Tray, dispose all water, and allow
to cool completely before cleaning
• Do not use a thinner, benzene, abrasive cleansers or brushes (nylon or metal) detergents,
alkaline soaps, bleach or anything that may damage the surface of the product.
• Do not attempt to dry the product by turning it upside down when the bottom is wet
• Do not use a dishwasher or dish dryer for cleaning or drying.
Front Lid, Upper Lid & Body
• Do not wet or soak the Body in water.
• Do not wash any part of the Body or Control Panel
with water.
Wipe clean with a damp, well-wrung cloth.
Inner Lid
Wipe with a soft wet sponge.
Inner Container
[Daily] Wipe with a soft wet sponge.
[Monthly/periodically] Perform Citric Acid Cleaning.
• Do not use abrasives such as polishing powder, scrub brush,
nylon brush wire brush or any brushes with a wire core to avoid
unnecessary scratches.
• Perform the Citric Acid Cleaning especially when:
- Milky-white sediments are found on the surface (calcium scaling)
- White or glittering floating materials are found in the water
(crystals or minerals)
- Slimy residues are found on the surface or in the water (biofilm)
- Water has an odor (biofilm)
See pg.25 for how to perform Citric Acid Cleaning
The condition of the Inner Container may vary depending
on the water quality and frequency of use.
Pure Water Chamber,
Filter Chamber & Filter Cartridge
Remove the Filter Chamber and
clean the Pure Water Chamber, Filter
Chamber and Filter using RO / Pure
Water with a soft brush.
• Must use RO or Pure Water! Do not wash with tap
water (will introduce impurities into the core part of
the electrolytic cell).
• Be sure to drain out water from the Drain Tube after
cleaning (avoid introducing impurities).
• Be sure to reattach the Filter after cleaning. If you
find it difficult to clean the Filter, replace it with a
new one.
Pull up to remove, press down
firmly to attach.
Drip Grid & Drip Tray
Wipe clean with a damp, well-wrung cloth.
Power Cord & Plug
Wipe clean with a dry cloth.
Before storing the unit
•
Remove the Filter Cartridge.
•
Empty the Inner Container.
•
Drain out water from the Drain Tube.
•
Dry it completely.
•
Pack in a plastic bag and seal the bag.
24
Summary of Contents for EOS7150-H
Page 30: ...MEMO ...
Page 31: ...MEMO ...
Page 32: ...Biotek Environmental Science Ltd www besgroups com Rev A202008_EN_BES ...
