Heating & Maintaining Temperature OFF
In the case where the Heating & Maintaining Temperature function is ON during the hydrogen
water production, deactivating the hydrogen water production will also turn off the Heating &
Maintaining Temperature function.
Automatically Resuming Peak Production During Heating
The "Automatically Resuming Peak Production" function is
available while Heating Function is activated.
When refilling new water in the Inner Container and there is a
detection of 3
˚
C
(
7
˚F)
reduction during the Heating Function is
on, the system will reactivate the Resuming Peak Production
automatically. The production time will be rescheduled for a new
15 minutes to re-enrich the hydrogen water concentration to peak.
How to do:
Unplug the pot and wait till the temperature to
cool before re-plug.
Note:
Frequent overheat may cause deformation to the product.
Blinks
Steady ON
Automatic Overheat Protection
When system is overheating (water is empty
when heating), a safety protection will be
triggered to suspend all functions until
system cools.
x10s
17
Summary of Contents for EOS7150-H
Page 30: ...MEMO ...
Page 31: ...MEMO ...
Page 32: ...Biotek Environmental Science Ltd www besgroups com Rev A202008_EN_BES ...
