Biotek Cytation 5, Instructions For Use Manual

Page: 114 / 122

102 | Specifications
General Specifications
Microplates
The Cytation 5 accommodates standard 6-, 12-, 24-, 48-, 96-, and 384-well
microplates with 128 x 86 mm geometry, 1536-well plates (for imaging only),
Take3 and Take3 Trio Micro-Volume Plates, microplate slides, T25 cell culture flasks
(with adapter), and 35 mm, 60 mm, and 100 mm Petri dishes (with adapter).
Maximum Plate Height: 1.0"
Hardware and Environmental
Light Source
Absorbance, Fluorescence
(FI), monochromator-based:
Xenon flash light source, 20W maximum average
power (not user-changeable)
Fluorescence (FI/FP), filter-
based:
Xenon flash light source, 5W maximum average
power (not user-changeable)
TRF (filter-based):
Xenon flash light source, 5W maximum average
power (not user-changeable)
Dimensions:
20.25" D x 15.50" W x 17.5" H
51.4 cm D x 39.4 cm W x 44.5 cm H
Weight:
With all modules installed, without power supply or
dispense module attached, < 80 lbs. (36.3 kg)
Environment:
Power-up temperature 18ºC to 30ºC (64.4ºF to
86ºF)
Note: Performance measurements, including
detection limits, were verified up to 25ºC (77ºF).
Humidity: 10% to 85% relative humidity (non-condensing)
Power Supply:
24-volt external power supply compatible with 100–
240 V~; +/-10% @50–60 Hz
Power Consumption: 130W maximum
Incubation:
Temperature control ranges from 4ºC over ambient
to 65ºC.
Temperature variation ± 0.5ºC across the plate @
37ºC, tested with Innovation Instruments, Inc.
temperature test plate
Top and bottom incubation controlled via software-
adjustable gradient.
For models with the alpha laser module: Alpha
laser module operation is disabled above an internal
instrument temperature of 35ºC.
BioTek Instruments, Inc.