Biotek 800 TS Series, Instructions For Use Manual

Page: 33 / 60

Operate the Reader Using the Touchscreen| 29
800 TS
Operate the Reader Using the Touchscreen
General Information
When you turn on the 800 TS, the touchscreen turns on automatically and opens to the
Main Menu after the start-up system test and bulb warm-up. The length of the bulb warm-
up process varies from three minutes for narrow beam and UV models, and 30 seconds
otherwise.
• To select a button or check box or to activate a tab, tap the item once.
•
To return to the Main Menu from any other screen, tap Home in the top-left
corner.
•
For instructions on cleaning the touchscreen, see the Maintenance chapter.
Note: To preserve the life of the bulb, turn it off when not needed by tapping in
the Instrument or Quick Menu. Note that if you turn off the bulb, the reader will go
through the bulb warm-up process when you turn the bulb back on (three minutes for
narrow beam and UV models, and 30 seconds otherwise).
Main Menu
Do not use a sharp stylus or pencil on the touchscreen. Doing so can damage the
touchscreen's surface. You can use a stylus designed for capacitive touchscreens.