Biospace InBody720, User Manual

Page: 26 / 84

14
5. Repacking
Be sure to turn off the power switch and unplug the power cable before repacking. Be careful not to damage foot and hand
electrodes while repacking.
➊
Turn off the power and remove the power cable.
➋
Use elastic bands to hold hand electrode cables. Lift up the rear end slightly,
hook the elastic band to the rear level screw, pass it through the cable and
hook it again to the rear level screw.
➌
Place the support pad on the bottom of the box and place the InBody720
on top of the support pad.
➍
Place the head pad in the box as shown.
➎
Open the hinge cover and loosen the 4 screws.
➏
Fold down the stand portion of the InBody720 to lay on the head pad.
➐
Insert the accessory bag in the box.
➑
Put upper pads on the top.
➒
Close the box and seal it with tape.