Biospace InBody720, User Manual

Page: 19 / 84

7
(2) Control & Connection Unit
This unit allows the equipment to connect to peripherals such as computers, printers, as well as transferring data back
and forth.
➊
9pin Serial port, Male (RS-232C)
Com 1 port is used to connect to the personal computer.
Com 2 port is used for an additional peripheral.
Com 3 port is used for an additional peripheral.
➋
LAN port (10/100 Base-T)
Through LAN cable, the equipment can communicate with the external systems including computers. The LAN
interface supports both 10Mbps and 100Mbps Ethernet connection.
➌
USB port (Version 1.1)
InBody720 communicates with external devices such as computers and printers through the two USB ports and cables.
You can use either of the two USB ports interchangeably. As of now, the equipment supports only printers as a
USB device.
➍
25pin parallel port (IEEE 1284)
The 25pin parallel port is used to connect to printer. If you intend to use USB printer, connect it to the USB port.
Only the peripherals provided by Biospace can be connected to InBody720. For any inquiry about peripherals, contact
Biospace.
Do not touch signal input, signal output or other connectors, and the patient simultaneously.