23
B. Body Composition Measurement Mode
This procedure has two steps. One is weight measurement and the other is body composition measurement. The
procedure begins with the weight measurement screen, which is the initial environment settings of the InBody720, when it
is factory-released. The InBody720 goes back to the weight measurement screen, as the examinee steps down from the
stand.
(1) See if the InBody720 is in test-ready status. The windows that are in test-ready status should look like as shown below.
(2) The less clothes or devices you wear during the test, the more accurate the test results will be. To get as close to the
actual weight as possible, take off all accessories before testing.
(3) Both heel and the ball of your feet should touch the foot electrode. Step on the stand barefoot. Once you are on, the
LCD monitor will display your weight. Put your hands down naturally and stand still comfortably, until the fluctuation in
the weight goes down to zero and the value for weight is stabilized.
(4) When the weight value is stabilized, InBody720 displays the examinee’s weight. The weight is recorded at the personal
information windows- as shown on the picture above.
Summary of Contents for InBody720
Page 9: ...V Indicators Safety Symbols A Indication B Safety signs...
Page 61: ...48 Chapter 3 Setup Establishment 1 Setup 2 DATABASE 3 Modification Example...
Page 77: ...62 Chapter 5 Consumables 1 Consumables...
Page 79: ...63 Appendix 1 More About InBody720 2 Specifications 3 Customer Service Information...
