www.biopac.com
BIOPAC Hardware |
NIBP Systems
| Page 1 - 8
Updated: 6.7.2013
NON-INVASIVE SMALL ANIMAL TAIL BLOOD PRESSURE SYSTEMS
NIBP250 Blood Pressure Amplifier
NIBP200A Blood Pressure System
NIBP Amplifiers with built-in pump automatically inflate the tail cuff to occlude the vessel in the tail of a rat or
similar small animal, and then slowly deflate the cuff when the inflation point is reached, providing a linear drop
in pressure. A single control starts both the inflation and deflation cycles, making the system very operator-
friendly. Amplifiers have two analog outputs for pressure and pulse waveforms, plus gain adjustment to amplify
or attenuate the pulse signal. Systolic, diastolic, and mean BP values.
NIBP250
Touchscreen LCD controls and displays data for local analysis and storage. Use as a stand-
alone system or interface to BIOPAC or third-party A/D hardware. USB 1.1 compatible flash memory
port and SD card slot.
NIBP200A
Amplifier for use with Tail Cuff Sensor
Systems include:
Amplifier order NIBP250 or NIBP200A
One tail cuff sensor (request size):
RXTCUFSENSOR9.5 = 9.5mm, 100-220 g
RXTCUFSENSOR11 = 11 mm, 200-280 g
RXTCUFSENSOR13 = 13 mm, 250-350 g
One small animal restrainer:
RXRESTRAINER-MICE,
10-25
g
(mice)
RXRESTRAINER-S, 70-150 g (small rat)
RXRESTRAINER-M, 150-200 g (medium rat)
RXRESTRAINER-L, 250-350 g (large rat)
Optional MRI-compatible sensors available – add to an existing NIBP200A system
RXCUFSEN9.5-MRI = 9.5 mm, 100-220 g
RXCUFSEN11-MRI = 11 mm, 200-280 g
RXCUFSEN13-MRI = 13 mm, 250-350 g
Analog outputs: pressure 0-3 V DC, Pulse 0-4 V DC
Output cables: pressure cable and pulse cable
Interface cables: to BIOPAC or third-party A/D hardware
User’s Manual
Optional Tail Heater: TAILHEATA 110 V or TAILHEATB 220 V
HARDWARE GUIDE