BIOPAC Systems MP35 Hardware Manual Download | Manualshive

Page: 129 / 157

background image

[email protected]

[email protected]

www.biopac.com

BIOPAC Hardware |

NIBP100D

| Page 1 - 3

Updated: 2.12.2013

NIBP100D NONINVASIVE BLOOD PRESSURE SYSTEM

The NIBP100D is a stand-alone noninvasive blood pressure monitoring system
that provides a continuous, beat-to-beat, blood pressure signal recorded from
the fingers of a subject. Uses a double finger cuff sensor that is comfortable for
the subject to wear and easy to place on the hand– three included cuff sensors
fit small to large fingers. The system outputs a continuous blood pressure
waveform that is similar to a direct arterial pressure waveform. Monitor
displays values for systolic, diastolic, mean blood pressure, and heart rate.
Add BSL-TCI5 to use with an MP36 System.

NIBP100D System includes:



Blood Pressure Module with external mains power and interface cables



Finger cuff sensors (3): small 10-18 mm, medium 18-24 mm, and large 24-28 mm



BP cuffs for calibration (4): xs 12-19 cm, small 17-25 cm, medium 23-33 cm, and large 31-40 cm



Finger cuff sensors are a consumable item and typically last ~12 months based on 3-4 hours/week.



Order additional finger cuffs as RXNIBPDFINGER-L, RXNIBPDFINGER-M, or RXNIBPDFINGER-S.

See also:

BSL

PRO

Lesson H18 Exercise Physiology

The NIBP100D Noninvasive Blood Pressure Monitoring System is suitable for small children (~6 years) to large
adults

Click the

"Resources"

tab above for the

NIBP100D User Manual

with complete specifications and

NIBP100D

Calibration.

SPECIFICATIONS

Double Cuff Finger Sensor

Finger cuff sensors are a consumable item and typically last ~12 months based on 3-4 hours/week. Order
additional or replacement finger cuffs as RXNIBPDFINGER-L, RXNIBPDFINGER-M, or RXNIBPDFINGER-S.

Large 24 - 28 mm, dark red
Medium 18 - 24 mm, dark blue
Small 10 - 18 mm, light blue

Blood Pressure Cuffs (Latex free)

Child (12 – 19 cm) works starting at 20 kg (44 lbs), age 6 years
Small Adult (17 – 25 cm)
Adult (23 – 33 cm)
Large Adult (31 – 40 cm)

NIBP100D Continuous Noninvasive Arterial Pressure

Parameter classification:

Sys, Dia, Mean [mmHg]
Pulse [bpm]

Measuring range:

Sys: 40 - 250 mmHg (5.3 – 33.3 kPa)
Dia: 30 - 210 mmHg (4 - 28 kPa)
Mean: 35 - 230 mmHg (4 – 30.6 kPa)
Heart rate indication range 20-200 bpm

Accuracy ±5 mmHg (0.6 kPa)

HARDWARE GUIDE

«
...
127
128
129
130
131
...
»

Summary of Contents for MP35






























































































































































Reviews:

No comments

Related manuals for MP35

VBOX Micro RLVBMIC01

Brand: Racelogic Pages: 29

Brand: Microedge Instruments Pages: 64

Brand: Adamczewski Pages: 57

Brand: LineEye Pages: 44

Brand: Fronius Pages: 42

Brand: Extech Instruments Pages: 5

Brand: Dostmann Pages: 25

Brand: Decatur Electronics Pages: 36

Brand: Datafox Pages: 53

Brand: Omega Pages: 6

Brand: Lascar Electronics Pages: 4

Brand: VOLTCRAFT Pages: 128

Brand: VOLTCRAFT Pages: 112

VME-SG2 560-5608

Brand: TrueTime Pages: 71

Log-Box SC10193

Brand: TTS Pages: 20

Brand: Comet Pages: 20

Brand: Elma Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands