44
45
Fig. 4.11: Display of the muscle mass per-
centage
When you are finished reading your values,
you can switch your scale back to sleep
mode by pressing the START button for about
two seconds. If you step off the standing area,
the scale switches off automatically after one
minute at most.
Notes:
– Always enter only your own assigned
user no. so that it can be ensured that the
measurements are allocated to the correct
measured value memory.
– Stand still on the scale when the body fat
and body water analysis are being done.
This may take several seconds.
– If the display of the weight doesn’t look
like Fig. 4.8, but looks like Fig. 4.12 or
4.13, then the unit of measurement was
not set as “kg” in the settings menu, but
as an English unit of weight. This unit of
weight can be changed to “kg” in the set-
tings menu for the common setting values
(see Section 3.5.2). The weight is then
shown as in Fig. 4.8.
Fig. 4.12: Weight displayed in English stones
Fig. 4.13: Weight displayed in English pounds
– The measured data is automatically stored
in the measured value memory with the
date and time under the current user no.
In general, all measured data is stored,
even if not all data is displayed (due to be-
ing configured accordingly in the settings
menu for individual measured data)
(see Section 3.5.3).
– The device switches off automatically at
most one minute after the end of the meas-
urement.
C
ar
ry
in
g o
ut a m
ea
su
re
m
en
t
4
