38
39
Fig. 4.3: Scale measuring
other body data, and no measured values
are stored. Set the user no. to “0” to put
the scale in guestmode. After the user no.
“0”, the weight display “0.0” appears after
about 3 seconds (Fig. 4.2). The time can be
reduced by pressing the START button.
If you step onto the scale beforehand, the
error “E:1” is displayed. Then you must get
off the scale and restart the measurement.
Fig. 4.1: User no. “0” (guest mode)
Fig. 4.2: Scale is ready for measurement
Step 2:
The scale is now ready to measure your
weight. Stand on the scale. Stand still on the
scale with your weight distributed evenly
on both legs. The scale immediately begins
with the measurement. As long as the meas-
ured value is being recorded, two dashes are
shown on the display instead of the weight
(Fig. 4.3). Afterwards, the result is displayed
(Fig. 4.4).
If you step off the standing area, the scale
switches off automatically after 30 seconds.
Fig. 4.4: Display of the weight
Note:
If the body fat, body water and muscle per-
centages should also be measured in addition
to the weight, or if the measurement should
be stored permanently, the required personal
user data must be input before using the scale
for the first time via the settings menu of the
scale together with the personal user no.
C
ar
ry
in
g o
ut a m
ea
su
re
m
en
t
4
